Boca Pro16 Series - Yn Select Stored Profile on Power up; Z Stored Phone Number

124
BOCA PRO16 Reference Guide
See Also
&M command Synchronous/Asynchronous Mode
Range
0-2
COMMAND MEANING
&Yn Select Stored Profile on Power Up
The &Yn command determines which stored (User) profile is selected as
the Active profile when the modem is switched on and also when &D3
is selected and DTR drops.
Options
AT&Y0 Select stored profile 0 on power up
AT&Y1 Select stored profile 1 on power up
AT&Y2 Select stored profile 2 on power up
AT&Y3 Select stored profile 3 on power up
See Also
&D3 command Controlling DTR
Range
0-3
COMMAND MEANING
&Z Stored Phone Number
The &Z command enables you to store phone numbers in your modem’s
non-volatile memory. The command takes the form &Zn=x, where x is
the phone number you want to store and n indicates which of the stored
phone numbers it will be saved as. Stored numbers may contain up to 20
characters, including dial modifiers.
Do not include, in the stored phone number:
an AT
a D (Dial) command
an S (Stored number) dial modifier
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:38 PM124