172
BOCA PRO16 Reference Guide
To return to the original factory default settings:
• Type: AT&F <E>
FRe-loading the factory default settings with AT&F will not save these
default settings to non-volatile memory. To save factory defaults to
non-volatile memory so they can be used again, after switching the
modem off and on, follow the &F command with the Write Configu-
ration (&Wn) command.
To reset and store all settings to the factory default:
• Type: AT&F.
S-Registers
S-Registers
pro16ref.pm6 6/14/96, 2:39 PM172
To Next Page
Loading...