Bosch D7412GV4 - Page 103

D9412GV4/D7412GV4/D7212GV4 Panel and Area Wide Parameters | en 103
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
L## Disarm
Use the disarming function to disarm areas that are master armed or perimeter armed. If
enabled, the following disarming choices are available to the user with this authority:
– DISARM ALL: Disarms all areas within the CC# Scope of the keypad being used by
accessing the Function Menu and the authority level of the user performing the function.
– DISARM AREA: Disarms only the displayed area.
L## Master Arm Delay
Master arms areas based on the CC# Scope of the keypad using an exit delay time.
When this item is accessed through the Function List, Master Arm All allows the user to arm
all areas according to the authority level of the user and within the CC# Scope of the keypad
using an exit delay time.
Arm Area arms only the area displayed. If COMMAND 1 is used, it arms only the area where
the keypad is assigned.
L## Master Arm Instant
This authority level permission allows a user to execute the Master Arm Instant function. Refer
to Section Master Arm Instant, page 94.
Arm Area arms only the area to which the keypad is assigned.
If COMMAND 11 is used, it arms only the area where the keypad is assigned.
L## Perimeter Instant
NOTICE!
To determine the L## default values Page 103 through Page 115, refer to the User Interface
section in the program record sheet.
Default: Authority Levels 1-5, 14: Enabled (E)Authority Levels 6-13: Blank (-)
Selection: - or E
Function No. Function Name
1Disarm
NOTICE!
Many options are available for arming and disarming. Selecting an option depends on A# Area
Type and CC# Scope. Read the definitions of area type in Section 3.10 Area Parameters,
page 61 and CC# Scope in Section 3.11.1 Keypad (Command Center) Assignment, page 79.
Default: Authority Levels 1-5: Enabled (E)Authority Levels 6-15: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
2 Master Arm Delay [COMMAND][1]
Default: Authority Levels 1-2: Enabled (E)Authority Levels 3-15: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
3 Master Arm Instant [COMMAND][1][1]
NOTICE!
Use COMMAND 11 carefully because all Perimeter and Interior points become Instant Armed.
Default: Authority Levels 1-4: Enabled (E)Authority Levels 5-15: Blank (-)
Selection: - or E