Breas Nippy 4 - Transferring Data between the Ventilator and a PC

• Red: High priority alarms
• Yellow: Medium priority alarms
• Blue: Messages
• White: Currently selected row
Click Close when done.
5.10 Transferring Data between the Ventilator and a PC
WARNING!
Read the chapter 2.2 Electrical Safety, page 16 carefully to make sure all conditions are con-
sidered and met.
CAUTION!
Do not eject the memory card or disconnect the USB cable while the Nippy 4 is transfer-
ring data. Doing so may result in loss of data and/or damaged equipment.
NOTE
In order to view and present patient data, Breas software must be used.
Instructions on how to manage data in the Breas software can be found in the software
help.
How to Use the Nippy 4
59
Doc. 006553 M-6 User Manual