Breas Nippy 4 - The Alarms List; The Monitored Values Pane

Unit Min Max Default
—
Off
On
Off
5.6.2.18 Humidifier
Humidifier allows the user to start or stop the heated humidification.
The click-in water chamber needs to be connected before the setting can be turned On.
Unit Min Max Default
—
Off
On
Off
5.6.2.19 Humidifier Setting
The Humidifier Setting defines the level of humidity of the air delivered to the patient.
Unit Min Max Default
Step 1 5 3
5.6.2.20Heated Circuit Temp
Heated Circuit Temp setting will define the temperature of the heated circuit.
Unit Min Max Default
°C/°F 16/61 30/86 27/81
5.6.2.21 Circuit Heating
Circuit Heating allows the user to start or stop the heating of the circuit.
The Heated Circuit needs to be connected before the setting can be turned On.
Unit Min Max Default
—
Off
On
Off
5.7 The Alarms List
The Alarms list displays the alarm settings. Which alarms that are available depends on the
current treatment mode and settings.
5.8 The Monitored Values Pane
This section describes the monitored treatment values that are displayed on the start screen
54
How to Use the Nippy 4
User Manual
Doc. 006553 M-6