Broadcom NetXtreme - Page 76

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 76
Broadcom Confidential and Proprietary
d. Custom PCIE power...: Yes (3.3v, Sustained, D0, 1.2 Watt...)
e. Custom VPD-R Data...: Yes
g. Cable Sense/Low Power Energy Detect .....: Disabled
h. MBA CFG Data
i. User Defined Data…...: No
j. Link Aware Mode……: Enabled
k. Link Speed Power……: Enabled
x. Save & exit
----------------------------------------------- LED Mode (option b)-----------------------------------------_
-> b
Selfboot LED Mode selection
0. Mac Mode
1. Phy1 Mode
2. Phy2 Mode
3. Shared Traffic/Lik LED Mode
4. Shasta MAC mode
5. Wireless Combo Mode
----------------------------------------------- Custom PCI power (option c)----------------------------------------
-> c
Selfboot PCI Power Consumption/Dissipate value
1. Use system default
2. Costom define
-> 2
D0 State Power Comsumed decimal value (0-255) (100)->100
D3 State Power Comsumed decimal value (0-255) (10)->10
D0 State Power Dissipated decimal value (0-255) (100)->100
D3 State Power Dissipated decimal value (0-255) (10)->10
-------------------------------------------- Custom PCIE power (option d)----------------------------------------
-> d
Selfboot PCIE Power Budgeting Data
1. Use system default
2. Costom define
-> 2
0. Data0: 3.3v, Sustained, D0, 1.2 Watt
1. Data1: 3.3v, Maximum, D0, 1.4 Watt
2. Data2: 3.3v, Maximum, D3, 0.6 Watt