Brother BAS-600 - Treadle and Start Switch Description; Treadle Operation

TREADLE AND START SWITCH DESCRIPTION
BAS-600
BAS-601
* When running a flap sewing program, the machine will not operate when the start switch is pressed unless
the flap pres~er is down.
* During normal sewing, the machine will operate when the start switch is pressed after the folding plate
operates.
* Set MODE to either AUTOMATIC or MANUAL.
1. Treadle operation
1. When the treadle 0 is pressed back, the padding cloth presser foot springs (R) @ and (L) @ will rise.
2. When the treadle 0 is released, the padding cloth presser foot springs (R) @ and (L) @ will descend.
3. When the treadle 0 is pressed to position 1, the carriage feed (L) 9 will descend.
4. When the treadle 0 is pressed to position 2, the carriage feed (R) @) will descend.
5. When the treadle 0 is pressed to position 3, the binder@ will descend and the folding plate will operate.
6. When the treadle 0 is pressed to position 4, the flap presser (L) 8 will descend.
7. When the treadle 0 is pressed to position 5, the flap presser (R)@) will descend.
8. When the start switch €) is pressed, the carriage feeds will operate.
* The order in which the carriage feeds and the flap pressers operate (3,4,6,7 above) can be changed by
resetting the DIP switches. (Refer to page 12.)
-11-
From the library of: Superior Sewing Machine & Supply LLC