Brother BAS-600 - Adjusting the Movable Knife Assembly

11. Adjusting the movable knife assembly
(1) Adjusting the movable knife stroke
When the movable knife 0 is at the bottom of its stroke, there should be a 1.5-2.0 mm gap to the top of
the cloth slide plate @.
(Adjustment)
Loosen the nut e in the cylinder assembly 8, and extend or retract the cylinder rod @ to adjust the gap.
Extend the rod to decrease the gap.
Retract the rod to increase the gap.
-64-
From the library of: Superior Sewing Machine & Supply LLC