Brother BAS-600 - Removing the Cloth Guide (Left); Removing the Binder

1. Removing the cloth guide (left)
1. Remove the two screws 8
1
the flap sensor and the sensor bracket.
2. Loosen the two screws @) in the set collar @. Remove the set collar @I the cloth guide arm e and the
spacer@.
3. Remove the two screws €} in the cloth guide arm e I then remove the cloth guide & .
2. Removing the binder
1. Remove two bolts 0
1
the spring and flat
washers and the binder assembly@.
-:-27-
From the library of: Superior Sewing Machine & Supply LLC