Brother DCP-L5652DN Service Manual

2-21
Confidential
Error
codes
Description
Refer
to:
Error
codes
Description
Refer
to:
C100
Failed to save data to an USB flash
memory.
2-78
E400 ―
C700
There is insufficient memory to
expand PC print data.
2-79 E500
An error occurred during access to the
DRAM in the main PCB ASSY.
2-80
C800
The memory size allotted for Secure
Print was exceeded when saving
Secure Print data.
2-79 E600
Write error in the EEPROM of the
main PCB ASSY
2-80
C900 ― E701 System error in the flash ROM 2-80
CA00 ― E702 Read error in the flash ROM 2-80
D100
An error occurred while initializing the
modem.
2-79 E900
An error occurred while initializing the
NFC.
2-80
D200
Detected that the modem PCB is not
connected.
2-79 EC00
A USB device not within the
specification is connected to the USB
terminal, resulting in over current.
2-81
D800
An error occurred while initializing the
touch panel.
2-79 ED00
Failed to authenticate the firmware for
the self test.
2-81
D900 ― EE00
Failed to authenticate the NVRAM for
the self test.
2-81
DA00 ― F900
The spec code was not entered
correctly.
2-81
DB00 ― FA01 ―
E000
An error occurred in the ROM check
sum.
2-80
FA02 ―
E100 Program error 2-80 FA03 ―

Brother DCP-L5652DN Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Memory	256 MB
Processor	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Print Speed	42 ppm
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	250 sheets
Scanner Resolution	Up to 1200 x 1200 dpi
Connectivity	USB, Ethernet
Mobile Printing	Brother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner Yield	Standard: 3, 000 pages, High Yield: 8, 000 pages