Brother HL-5350DN

4-8
Confidential
(14) Remove the four cup S M3x6 SR Taptite screws to remove the Shield cover and the FG
harness.
Fig. 4-10
(15) Remove the two bind B M4x12 Taptite screws, and then remove the Side cover R by
following the direction from 15a to 15d.
Fig. 4-11
Taptite, cup S M3x6 SR
Taptite, cup S M3x6 SR
FG harness
Shield cover
Taptite, bind B M4x12
Taptite, bind B M4x12
Hook
Hook
Hooks
Hooks
Hooks
Shield cover R
15d
15c
15a
15b