7-21
Confidential
Title & Subtitle Item to be Set Description
PS CELL MODE PS CEIL=FLOOR*
PS CEIL=CEIL
HP ESC E COMMAND HP ESC E=RESET* Normal resetting.
HP ESC E=F/F Form feeds a printable page only.
DPX FF SUP. MODE DPX SUP. =NOMAL* Deletes all white pages having no
data.
DPX SUP. =SPEC. Deletes only the page that both sides
of paper is white.
COPY PAGES COPY PAGES=ON* OFF: 1 page is fixed for the copy
page number.
COPY PAGES=OFF
JOB TIMEOUT SEL TIMEOUT=ON* PJL JOB TIMEOUT is effective.
TIMEOUT=OFF PJL JOB TIMEOUT does not carry
out.
PICKUP RETRY SET PICKUP RETRY=2*
(0-7)
PICKUP RETRY SET TIME OUT=???sec
PSCOPYPAGE PSCOPYPAGE=L3* Changes the PS copypage operator
from Level3 to Level2.
PSCOPYPAGE=L2
1JOB1PAGE SEL 1JOB1PAGE=SX* Duplex=ON makes the printing
speed of 1 page of data faster.
Sets up the printing mode. (Simplex/
Duplex)
1JOB1PAGE=DX
APPLEUSBPS BINARY=OFF* Enables to print PS Pure Binary data
via Mac USB.
BINARY=ON
MP CAS ADJUST MPTRAY YADJUST Adjusts the position of starting
scanning in each paper tray.
-50 to 50 dot (300dpi)
PCTRAY YADJUST
DUPLEX YADJUST
MPTRAY XADJUST Adjusts the position of starting
scanning in each paper tray.
-100 to 750 dot (300dpi)
TRAY1 XADJUST
TRAY2 XADJUST
TRAY3 XADJUST
DUPLEX XADJUST
NET HEAP SIZE HEAPSIZE=xxxxK* Changes the size of the beep area
used on Web. Allows you to change
the size by 15 degrees. (The value
from 0 to 14 is stored in the NVRAM
internally.)
PS FONT CACHE CLEAR CACHE=OFF* Controls whether the font cache is
cleared or not when finishing a job in
the PS emulation. When setting to
OFF, the font cache is not cleared
and is enabled for the next job. When
setting to ON, the font cache is
cleared and disabled for the next job.
CLEAR CACHE=ON
To Next Page
Loading...
