Brother HL-5350DN

7-22
Confidential
Title & Subtitle Item to be Set Description
TONER LOW
Changes the timing
when the toner low
error is detected.
TONERLOW=ON* Checks toner with the duty level of
2%. (Default)
TONERLOW=DELAY Checks toner with the duty level of
8%.
TONERLOW=OFF Does not detect the toner low error.
T1 MEDIA FIX
Selects the media type
of Tray1. The default
setting is OFF. When
fixing the media to any
type of setting, the
printer ignores the
media type set in the
print data (driver) and
prints with the media
type set in the printer.
T1 FIX=OFF* The media type of Tray1 follows the
one set in the print data.
T1 FIX=PLAIN Fixes the media of Tray1 to plain
paper.
T1 FIX=TRANS. Fixes the media of Tray1 to
transparencies.
T1 FIX=THIN Fixes the media of Tray1 to thin
paper.
T1 FIX=BOND Fixes the media of Tray1 to bond
paper.
T1 FIX=RECYCLED Fixes the media of Tray1 to recycled
paper.
T2 MEDIA FIX
Selects the media type
of Tray2. The default
setting is OFF. When
fixing the media to any
type of setting, the
printer ignores the
media type set in the
print data (driver) and
prints with the media
type set in the printer.
T2 FIX=OFF* The media type of Tray2 follows the
one set in the print data.
T2 FIX=PLAIN Fixes the media of Tray2 to plain
paper.
T2 FIX=TRANS. Fixes the media of Tray2 to
transparencies.
T2 FIX=THIN Fixes the media of Tray2 to thin
paper.
T2 FIX=BOND Fixes the media of Tray2 to bond
paper.
T2 FIX=RECYCLED Fixes the media of Tray2 to recycled
paper.
T3 MEDIA FIX
Selects the media type
of Tray3. The default
setting is OFF. When
fixing the media to any
type of setting, the
printer ignores the
media type set in the
print data (driver) and
prints with the media
type set in the printer.
T3 FIX=OFF* The media type of Tray3 follows the
one set in the print data.
T3 FIX=PLAIN Fixes the media of Tray3 to plain
paper.
T3 FIX=TRANS. Fixes the media of Tray3 to
transparencies.
T3 FIX=THIN Fixes the media of Tray3 to thin
paper.
T3 FIX=BOND Fixes the media of Tray3 to bond
paper.
T3 FIX=RECYCLED Fixes the media of Tray3 to recycled
paper.
DEF PCL ERRPRT
Sets the default value
of PCL error print. The
setting value is
reflected on the setting
value of PCL error print
when implementing
PJL initialization or
factory reset.
DEF ERRPRT=AUTO* Identifies the model and determines
the default value automatically.
LED model: ON
LCD model: OFF
DEF ERRPRT=OFF Sets the default value of PCL error
print to OFF.
DEF ERRPRT=ON Sets the default value of PCL error
print to ON.