Brother P-touch QL-710W User Manual

1 - 22
 Acceptable range of black level
Black level: 0 ≤ Measured value ≤ 60
Fig. 31 “Sensor level check” screen
(4) If the inspection is finished (with OK), the measured value is displayed in the
“Results” field on the main screen.
<Display example in case of OK>
Fig. 32 “Sensor black level check” OK

Brother P-touch QL-710W Specifications

General

Maximum Label Width	62 mm
Resolution	300 dpi
Cutter	Automatic
Device Category	Label Maker
Power Source	AC adapter
Printing Technology	Thermal
Connectivity	USB, Wi-Fi
Media Type	Die-cut labels, Continuous labels
Supported OS	Windows, Mac