Brother S-7300A - Page 101

S-7300A
6. ASSEMBLY
90
1166D
1165D
Screw stop
Screw stop side
Screw stop side
7. Feed motor (Place onto PM arm 8.)
8. PM arm
9. Motor bracket
10. Socket bolts [4 pcs]
11. Set screws [2 pcs]
(1) Motor shaft
Align the screw stop on the motor shaft (1) with
the screw stop side of the PM arm 8.
First tighten the set screw 11 on the screw stop side.
Check that the PM arm 8 moves
smoothly.
Place the motor bracket 9 against the
top-
right of the processed surface of the
bed.