Brother S-7300A - Page 21

S-7300A
3. FUNCTION SETTINGS
10
No. Setting range
Initial
value
Setting
units
Setting details
175
OFF, 1
～
2
OFF
1
Servo lock operation for sewing motor
OFF: Only stopping
1: After stopping until MSW-176
setting time
2: Ever after stopping
176
1
～
5
(seconds)
2 1 Operation time for servo lock
(*) Displayed when MSW-175 is set to "1"
1-5: Timer operates (1-5 seconds)
177
30
～
60
(degrees)
45
(degrees)
1
Servo lock released rotation angle
180
150
～
300
(sti/min)
220
(sti/min)
10 Thread trimming speed
(*) The actual sewing speed will not exceed the setting value for MSW-181.
181
150
～
300
(sti/min)
220
(sti/min)
10
Inching speed
182
500
～
2500
(sti/min)
1400
(sti/min)
100
Speed used for stopping sewing machine motor quickly over a constant
time
(*) This speed is used when MSW-150 is set to "ON".
184
150
～
3000
(sti/min)
3000
(sti/min)
100
Start backtacking limit speed
(*
) This is the upper limit for the start backtack sewing speed setting, and
the actual sewing speed will not be lower than the setting value for
MSW-181.
186
150
～
3000
(sti/min)
3000
(sti/min)
100
End backtacking limit speed
(*
) This is the upper limit for the end backtack sewing speed setting, and
the actual sewing speed will not be lower than the setting value for
MSW-181.
189
(*4)
(*5)
100
Max sewing limit speed
(*) This is the upper limit for the main backtack sewing speed setting, and
the actual sewing speed will not be lower than the setting value for
MSW-181.
(*4) -3 specifications: 150～5000 (sti/min)
-5 specifications: 150～4500 (sti/min)
(*5) For China and Japan: 4300 (sti/min)
For general export: 4000 (sti/min)
-3 specifications for Europe and America: 4700 (sti/min)
-5 specifications for Europe and America: 4500 (sti/min)