Brother TC-32B - General Description of Canned Cycles

Chapter 5 Preparation function (canned cycle) TC-32B
2004/01/22 5 - 4 eTCOMNCPR5-1.doc
5
5.3 General description of canned cycle
5.3.1 Command related to canned cycle motions
G90 Absolute command
(1) Data format
G91 Incremental command
G98 Initial point level return
(2) Return level
G99 R point level return
G73 , G74
G76 ~ G78
(3) Drilling mode G80 ~ G87
G89
G173 Refer to table 5-1(P5-2)
G177 , G178
G181 ~ G183
G185 , G186
G189
5.3.2 Setting of data in absolute/incremental command
eNCPR5.02.ai
Absolute command I ncremental command
Initial point
Z=0
Z
R
R point
Z point
Initial point
Z
R
R point
Z point