Brother TC-32B - G40 Single Command

TC-32B Chapter4 Preparation function (Tool offset function)
2004/01/22 4 - 15 eTCOMNCPR4.doc
4
4.1.6 G40 single command
When G40 is specified independently, the tool moves to the position offset
perpendicularly in the preceding block and stops.
Linear – Linear
G41 X_Y_D_;
G40 ;
Arc – Linear
G41 X_Y_D_;
G40 ;
(Note) Offset amount is cancelled by the axial movement command in
the following block.
G42XYD;
G40 ;
G01XYF;