Brother TC-32B User Manual

TC-32B Chapter 3 Preparation Function
2004/01/22 3 - 31 eTCOMNCPR3.doc
3
3.9 Programmable Data Input (G10)
(1) Input of working zero position
Command format G10L2Pn X_ Y_ Z_ A_ B_ C_ ;
n=1 : G54
n=2 : G55
n=3 : G56
n=4 : G57
n=5 : G58
n=6 : G59
When the G90 mode (absolute command) is selected, the commanded offset amount becomes
newly effective.
When the G91 mode (incremental command) is selected, the commanded offset amount is added
to the currently set offset amount to become a renewed offset amount.
When the additional axis is commanded while an optional additional axis is not installed, an alarm
will occur.
(Note) Working zero position … “Refer to “Manual Chapter 10”.
(2) Input of tool data
Tool length offset data G10L10 P_ R_ ;
Tool dia offset data G10L12 P_ R_ ;
P: offset number
R: offset amount
When the G90 mode (absolute command) is selected, the commanded offset amount becomes
newly effective.
When the G91 mode (incremental command) is selected, the commanded offset amount is added
to the currently set offset amount to become a renewed offset amount.
(Note) Tool data … Refer to “Manual Chapter 10”.

Brother TC-32B Specifications

General

Brand	Brother
Model	TC-32B
Category	Printer
Language	English