Brother TC-32B User Manual

TC-32B Chapter 3 Preparation Function
2004/01/22 3 - 53 eTCOMNCPR3.doc
3
3.24 Continuous skip function (G31)
The tool moves linearly (linear interpolation) at the specified feedrate from the current position to
the target position. If the detection signal turns ON in the meantime, the coordinate value when the
detective signal turns ON is stored in the system variables(#5061~#5063) of custom macro.
Command format G31P90X_F_ ;
G31P90Y_F_ ;
G31P90Z_F_ ;
Note 1: An alarm occurs when tool dia offset mode is selected.
Note 2: The tool does not move during a dry run state.
Note 3: The tool moves to the target position during a machine lock state.
0.
3.25 Change of tap twisting direction (G133,G134)
G134 I_
Command format Z_ S_;
G133 J_
Commanding G133 and G134 rotates the spindle clockwise and counterclockwise respectively.
Z: Z axis target position.
Conforms to G90/G91 mode.
I: Thread pitch
J: No, of thread
S: Spindle speed
The Z axis is moved synchronousy with the spindle.
These are one shot G codes.
Command G133/G134 each time even for continuous operation.

Brother TC-32B Specifications

General

Brand	Brother
Model	TC-32B
Category	Printer
Language	English