Brother TC-32B User Manual

TC-32B Chapter 3 Preparation Function
2004/01/22 3 - 1 eTCOMNCPR3.doc
3
CHAPTER 3
PREPARATION FUNCTION
3.1 Outline of G code
3.2 Positioning (G00)
3.3 Linear interpolation (G01)
3.4 Circular/helical interpolation (G02, G03)
3.5 Circle cutting (G12, G13)
3.6 Plane selection (G17, G18, G19)
3.7 Dwell (G04)
3.8 Exact stop check (G09, G61, G64)
3.9 Programmable data input (G10)
3.10 Soft limit
3.11 Return to the reference point (G28)
3.12 Return from the reference point (G29)
3.13 Return to the 2nd/3rd/4th reference point (G30)
3.14 Selection of machine coordinate system (G53)
3.15 Selection of working coordinate system (G54~G59)
3.16 Additional working coordinate system selection
(G54.1)
3.17 Scaling (G50, G51)
3.18 Programmable mirror image (G50.1, G51.1)
3.19 Coordinate rotation function (G68, G69)
3.20 Coordinate rotation using measured results (G168)
3.21 Absolute command and incremental command
(G90, G91)
3.22 Change of working coordinate system (G92)
3.23 Skip function (G31, G131, G132)
3.24 Continuous skip function (G31)
3.25 Change of tap twisting direction (G133, G134)
3.26 High speed peck drilling cycle (G173)

Brother TC-32B Specifications

General

Brand	Brother
Model	TC-32B
Category	Printer
Language	English