Chapter 7 Macro TC-32B
2004/01/22 7 - 6 eTCOMNCPR7-1.doc
7
7.2.5 Variable display and setting
Variables are displayed and manually set on the data bank screen.
Press the [3] and [ENT] keys at the data bank menu screen, or shift the cursor to the menu No.3
and press the [ENT] key. The following items are displayed on the screen.
Common variables (#100~#199, #500~#999) and local variables can be referred to or changed.
Number display
Numbers are displayed only when value of common variables for #100 to #199 or local variables
is in a range bellow.
The display changes to [***********], if not in a range.
Meter:-999999.999 to 999999.999
(Integer: six figures, Decimal: three figures)
Inch:-99999.9999 to 99999.9999
(Integer: five figures, Decimal: four figures)
Not display all of the significant figures, when the number in a range.
Display number is rounded number.
Therefore, not always same the number on display and the correct conference of the variable.
To Next Page
Loading...
