Brother TC-32B - Outside Cutting (90° ≤ Θ < 180°); Outside Cutting (Θ < 90°)

TC-32B Chapter4 Preparation function (Tool offset function)
2004/01/22 4 - 5 eTCOMNCPR4.doc
4
4.1.3.2 Outside cutting
(a)Type 1 : Linear - Linear
Type 1 : Linear - Arc
(b)Type 2 : Linear - Linear
Type 2 : Linear - Arc
(Note 1) Type 1 and 2 can be selected in parameter 1 for start-up and cancel
motions.
(Note 2) If the angle is close to 180˚ (179˚
≤ θ < 180˚) while type 2 is being
selected,actual movement will be type 1.