TC-32B Title
2003/3/20 4 eTCOMNCPRT1.doc
1
HOW TO USE THE MANUAL
This Instruction Manual consists of the following elements:
(1) General description Is an outline of the description given in the section.
(2) Alarm Is a alert given against a danger which may cause serious
damage or death to human being or may damage the machine.
The hazards are explained in this order:
degree of danger,
subject of danger,
expected damage,
preventive measure,
(3) Operation procedure Is a procedure of activating a function.
(4) Screen Is given to describe important points of a procedure given.
NOTE: This screen is only a representation of the information
displayed on the actual screen and therefore differs
somewhat from the actual screen
layout and screen fonts.
(5) Illustration Is a sketch, figure, view, etc. indicating dimensions, position or zone, given
in the points where it is necessary to provide complementary information to the text
description.
1 - 3
1 - 2
WARNING
Dropping a heavy object onto
your foot may fracture your foot
bones.
When lifting heavy objects,
wear safet
shoes.
1.3.1Before starting operation
Before starting operation careful to read bellow.
(1)Turn off the main power breaker handle on
the control box door. Never touch the primary side
power source or the terminal of the main power
breaker, as these have high voltage applied.
(2)Put up a signboard which says' Under Maintenance
(3)Never allow people to approach the machine,
particularly moving areas.
(4)Do not place any unnecessary object around the
machine.
(5)Wear a helmet and safety shoes.
(5) Illustration
(4) Screen
(2) Alarm
(3) Operation procedure
(1) General description