Buderus Logamatic 4323 Service Instructions

Fault log
19
Logamatic 4323 - Subject to technical modifications.
103
19 Fault log
Using the "Fault log" menu, you can display the last four fault messages of your
heating system. The MEC2 can only display the fault messages of the control
unit with which it is connected.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Fault log" appears.
The display shows the selected main menu.
Press "Display".
The fault message is displayed.
Fault messages recorded by the control unit will be displayed together with
the
time for the beginning and end of the fault.
The display will show "No fault" if the connected control unit has not recorded
any faults.
Turn rotary selector and scroll through recent fault messages.
Press "Back" to return to the next level up.
+
+
SERVICE LEVEL
Fault log
Fault
to 23:45 13.10
from 23:20 13.10
Flow sensor 2

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English