Heating curve
15
Logamatic 4323 - Subject to technical modifications.
97
15 Heating curve
Using the "Heat. curves" menu, you can display the current heating curves
of
the relevant heating circuits.
The flow temperatures (FL), which depend on the outside temperature (OT),
are
displayed.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Heat. curves" appears.
The display shows the selected main menu.
Press "Display" to call up a submenu (here: "Heating circ. 0").
The display shows the selected submenu.
Turn the rotary selector until submenu "Heating circ. 2" appears.
The display shows the selected submenu.
Press "Back" to return to the next level up.