Heating circuit data
11
Logamatic 4323 - Subject to technical modifications.
54
11.11Holiday setback type
A separate setback type can be set for the duration of the holiday.
For
explanations of possible settings, see Chapter 11.9.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Heating circ. + no." appears
(here:
"Heating circ. 2").
Press "Display" to call up a submenu (here: "Heating system").
The display shows the selected submenu.
Turn the rotary selector until submenu "Holiday Setback type" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "Hold if cold").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
* With setting "Holiday hold if cold" the rotary selector also takes you into
the
menu where you set the temperature (between -20°C and 10°C).