Buderus Logamatic 4323 - 24 Reset; Reset All Control Unit Parameter Settings

Reset
24
Logamatic 4323 - Subject to technical modifications.
115
24 Reset
24.1 Reset all control unit parameter settings
All values are automatically reset.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Reset" appears.
The display shows the selected main menu.
Briefly press "Display" to call up a submenu (here: "Factory settings Control
unit"). All
settings may be lost if you press for too long.
The display shows the selected submenu.
Press and hold "Display".
The blocks in the last line disappear one after the other. The settings have been
reset when no further blocks are displayed. The reset operation will be
terminated if you release the key before all blocks have disappeared. After
implementing a reset, the display automatically reverts to the next level up.
When terminating a reset, press "Back" to return to the next level up.
USER INFORMATION
With the "Reset" menu you can change all settings of the operator or service
levels back to their factory settings.
Exception: The time switch program is retained.
+
+
SERVICE LEVEL
Reset
RESET
Control unit
Factory settings
RESET
Control unit
Factory settings