Buderus Logamatic 4323 Service Instructions

DHW data
12
Logamatic 4323 - Subject to technical modifications.
77
12.3 Selecting switching optimisation
If you select the "Optimisation" function, DHW heating will begin prior to
the
actual start point. The control unit calculates the start time, taking into
consideration the residual DHW cylinder heat and the commencement
of
heating for the heating circuits, so that the DHW temperature is reached
at
the time you have selected (time switch).
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "DHW" appears.
Press "Display" to call up a submenu (here: "DHW").
The display shows the selected submenu.
Turn the rotary selector until submenu "Optimisation for starting" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "yes").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
+
+
DHW DATA
yes
DHW
DHW DATA
no
for starting
Optimisation
+
DHW DATA
yes
for starting
Optimisation
Input range Factory setting
Optimisation
yes
no
no

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English