General parameters
9
Logamatic 4323 - Subject to technical modifications.
31
9.3 Summer/Winter Time adjustment
Three different date and time setting options are available for all connected
control units:
– Radio clock
The adjustment is made completely automatically by the radio time signal.
– Automatic
Date and time input via keypad. The change from summertime to winter time
and vice versa is made automatically on the last weekend in March and
October.
– Manual
Date and time input via keypad. There will be no automatic summer/winter
time adjustment.
When using the MEC2 as a remote control, the reception of the radio time
signal depends on location and position.
Reception of the radio time signal is indicated by symbol on the display.
Generally, reception is possible within a radius of approximately 1.500 km
around Frankfurt/Main [Germany].
In case of reception problems, please observe the following:
– The radio reception is weaker in rooms surrounded by steel-reinforced walls,
in cellars, high-rise buildings etc.
– Maintain a minimum distance of 1.5 m from sources of interference,
such
as computer monitors and TV sets.
– The radio reception tends to be better at night than during the day.
USER INFORMATION
The MEC2 contains a radio clock receiver, which constantly monitors and
corrects the time switch inside the control unit. There will be no changeover
between summertime and winter time.
Well-screened boiler rooms in cellars can restrict the reception of the radio time
signal, making it necessary for you to set the date and time manually.
USER INFORMATION
Never enable the "Radio clock" function outside Germany.