General parameters
9
Logamatic 4323 - Subject to technical modifications.
32
Call up the service level. "Gen. parameters" is shown as the first main menu.
Press "Display" to call up a submenu (here: "Min outside temp").
Turn the rotary selector until submenu "Summer/Winter Time adjustment"
appears.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "Radio clock").
The display shows the selected submenu.
Release "Display" to save your input.
Press "Back" to return to the next level up.
USER INFORMATION
If "Radio clock" is not selected, radio time reception is disabled in all control
units connected to a data line. This also applies to the radio time signals of the
BFU/F remote control and other MEC2 programming units with radio clock
reception. The last input at a control unit in the system is valid.
Input range Factory setting
Summer/Winter Time adjustment
Radio clock
automatic
manual
automatic
To Next Page
Loading...
