Buderus Logamatic 4323 Service Instructions

DHW data
12
Logamatic 4323 - Subject to technical modifications.
86
12.11Setting the day of the week for thermal disinfection
You can set the day of the week when thermal disinfection should be carried out
via
the "Weekday Therm. disinfect" function.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "DHW" appears.
Press "Display" to call up a submenu (here: "DHW").
The display shows the selected submenu.
Turn the rotary selector until submenu "Weekday Therm. disinfect" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "Sunday").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
USER INFORMATION
The "Weekday Therm. disinfect" function is not displayed if thermal disinfection
was
previously set using the "External contact WF 1/3" function.
+
+
DHW DATA
yes
DHW
DHW DATA
Tuesday
Therm. disinfect
Weekday
+
DHW DATA
Sunday
Therm. disinfect
Weekday
Input range Factory setting
Thermal disinfection day
Monday – Sunday
daily
Tuesday

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English