Buderus Logamatic 4323 Service Instructions

DHW data
12
Logamatic 4323 - Subject to technical modifications.
75
12 DHW data
In its standard version, the Logamatic 4323 control unit is not equipped with
any
DHW heating function.
The following details regarding DHW data refer to the FM441 function module
(accessory).
12.1 Selecting the DHW cylinder
Here, you can log the DHW cylinder in and out if a DHW module is installed.
If
a cascade module is installed instead of a DHW module, you can select
the
type of hydraulic connection of the DHW cylinder.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "DHW" appears.
The display shows the main menu "DHW".
Press "Display" to call up a submenu (here: "DHW").
The automatically recognised DHW cylinder will be preset on the display.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "no").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
+
+
SERVICE LEVEL
DHW
DHW DATA
yes
DHW
+
DHW DATA
no
DHW
Input range Factory setting
DHW
yes
no
yes

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English