Buderus Logamatic 4323 Service Instructions

Selecting the control unit
23
Logamatic 4323 - Subject to technical modifications.
114
23 Selecting the control unit
With the "Control unit" menu you can select a control unit, if the MEC2 is
operated "offline", i.e. without a connected control unit or with a separate power
supply unit.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Control unit" appears.
The display shows the selected main menu.
Press "Display" to call up a submenu (here: "Logamatic 4211").
The display shows the selected submenu.
Hold down "Display" and select the required value with the rotary selector
(here:
"4323").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
+
+
SERVICE LEVEL
Control unit
Control unit
4211
Logamatic
+
Control unit
4323
Logamatic

Buderus Logamatic 4323 Specifications

General

Brand	Buderus
Model	Logamatic 4323
Category	Control Unit
Language	English