3-74 2006 Buell Lightning: Engine
HOME
INSTALLATION
1. Install oil line fittings with o-ring into swingarm and
tighten to 108-156
in-lbs
(12-17.6 Nm).
2. Push the correct flanged oil line into the correct fitting in
the swingarm until each one clicks in place under the
spring clip.
3. Lightly tug on oil line to verify that it is securely locked to
fitting and the spring clip is seated in the oil line fitting
groove.
4. Check oil level and add oil if required.
5. After running engine,
a. Inspect oil fittings for oil leaks.
b. Check oil level and add oil if required.
Figure 3-110. Flanged Oil Line
12021
To Next Page
Loading...
