3-104 2006 Buell Lightning: Engine
HOME
7. See Figure 3-154. Assemble crankcase halves together.
a. Apply a thin coat of GREY HIGH-PERFORMANCE
SEALANT (Part No. 99650-02) to crankcase joint
faces.
b. Slide outer race in right crankcase over pinion shaft
and bearing assembly.
c. Tighten fasteners to 15-19 ft-lbs (20-26 Nm).
NOTE
According to manufacturing, there is no torque sequence to
follow when tightening crankcase fasteners.
Figure 3-154. Crankcase Fasteners
D
b1016x3x
Indicates Bolt Pattern Location
One Behind Shifter Mechanism
To Next Page
Loading...
