2006 Buell Lightning: Maintenance 1-29
HOME
Tooth shear/cracks
Excessive load/shock load
Inspect/replace belt
Riding practice/operator choice
Worn sprocket Inspect/replace sprocket
Debris damage
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Continue to run but monitor condition frequently
Inspect for damaged or missing guards
Belt breakage
Excessive load/Shock load
Inspect/replace belt
Riding practice/operator choice
Damage due to handling (pry-on, etc.) Follow proper handling/installation procedure
Debris in sprocket or belt
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Excessive drive noise
Worn/damaged sprocket
Inspect/replace sprocket
Missing/damaged belt guards
Damaged flange Repair flange/replace sprocket
Damaged idler
Check structure (bad bearing, bent members, etc.)
Replace idler assembly
Damaged belt
Follow proper handling/installation procedure
Inspect/replace belt
Debris stuck in belt
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Missing/damaged belt guards
Debris stuck in sprocket
Inspect/replace sprocket
Follow proper handling/installation procedure
Inspect/replace belt
Missing/damaged belt guards
Table 1-8. Potential Limits to Belt Drive Service Life
CONDITION ROOT CAUSE REQUIRED ACTION
To Next Page
Loading...
