Chapter 1 General Information Page 1-5
1.3 Tabber/Labeler Base Specifications
Table 1-1: Tabber/Labeler Base System Specifications
Product handling
Minimum 3.0” x 5.0” 76mm x 127 mm
Maximum 16.0” x 17.0” 405 mm x 432 mm
Thickness Single Sheet to 5/8” Up to 38 mm
Physical
Overall Length 47.5” 1203 mm
Overall Height (w/Head) 72” 1829 mm
Height 34.3” to 36.5” 869 mm to 927 mm
Overall Width 29.5” 747 mm
Weight (Crated) 550 lbs 251 kg
Production Rate
Belt Speed 0 to 600 ft/min 0 to 3.00 m/s
Cycle Speed
Single tabs (up to 1”)
0 to 30,000 pph
Cycle Speed
Double tabs (up to 1”)
0 to 25,000 pph
Cycle Speed
Triple tabs (up to 1”)
0 to 23,000 pph
Electrical Requirements
Line Voltage
115 ± 15% VAC 220 ± 15% VAC for Europe
Line Current 6 Amps 5 Amps for Europe
Power 690 W 1.1 KW
Machine Motor 1/3 H.P. DC controller 1/3 H.P. DC controller
Mechanical Controls
Product Thickness Rotary adjuster for product thickness
Edge Selection Rotary adjuster for lateral table movement
Skidbar Pressure control for product conveyance
Buskro Ltd. BK730-2 Tabber
To Next Page
Loading...