Chapter 4 User Interface Page 4-16
4.6 Maintenance Schedule
The maintenance schedule in Table 4-3 below applies to equipment operated daily on an
8-hour basis. If the equipment is to be used more frequently, the maintenance schedule
must be adjusted accordingly.
Table 4-3: Head Maintenance Schedule
Period Maintenance Function
Daily
Remove the front safety cover and clean any debris, which may have fallen
into the machine.
Remove any labels, which may have settled on the rollers and sensor bin.
Wipe debris off all sensors to prevent malfunction.
Inspect and clean the fan filter installed on the enclosure.
Monthly
Grease all moving parts to help reduce wear due to friction.
The peel point sensor must be cleaned to prevent material build up. An air
compressor is recommended.
Semi Annually
Examine all moving parts for wear. Replace if necessary.
Note: Acquiring a small air compressor is recommended as compressed air is useful in
removing debris.
Buskro Ltd. BK730-2 Tabber
To Next Page
Loading...