Cambium Networks cnWave - Performance

Operation 203
Elements Description
RXThroughput Receiver throughput
TXThroughput Transmitter throughput
Performance
The Performance page displays the performance graph.
Figure 216: The Performance page
The Performance page contains the following graphs:
Table 51: Elements in the Performance page
Elements Description
RSSI Receiver Signal Strength Indicator. It is a measurement of the power present in a
received radio signal
Transmit
Power
Transmitting power
SNR Signal to Noise Ratio
MCSIndex Modulation and Coding Scheme (MCS) Index Values can be used to determine the likely
data rate of your wireless connection. The MCS value essentially summarizes the
number of spatial streams, the modulation type and the coding rate that is possible
when connecting your wireless access point.
Packet Error
Ratio
Packet error ratio. It is the ratio, in percent, of the number of Test Packets not
successfully received by the node to the number of Test Packets sent to the node by the
test set.
Received The number of frames received at the node.