Cambium Networks cnWave - 60 GHz cnWave Product Features

Product Description 22
l V3000: A Client Node (CN) is available in two sizes - 44.5 dBi high-gain antenna and 40.5 dBi
lower gain antenna, both with beamforming. These client nodes can support up to 5.4 Gbps, with
channel bonding for PTP configurations.
l V5000: A dual-sector Distribution Node (DN) that contains two sectors covering up to 280
degrees with beamforming. A single V5000 can connect up to four other distribution nodes or up
to 30 client nodes. V5000 can be used for PTP, PMP, and Mesh configurations.
Figure 5: 60 GHz cnWave products
Features
This section lists the features of each product of 60 GHz cnWave.
V1000 CN
l Supports modulations BPSK to 16 QAM (MCS1 to MCS12)
l Integrated antenna with beam forming
l 38 dBm EIRP
l Gigabit Ethernet
l 1 Gbps UL/1 Gbps DL throughput
l Powered by passive PoE or 802.3af/at PoE
l IP66/67
V2000 CN
l Supports modulations BPSK to 16 QAM (MCS1 to MCS12)
l 34.5 dBi ultra-high gain antenna with beam forming, peak 49 dBm EIRP
l 2.5 Gigabit Ethernet Main interface
l 2.5 Gigabit Ethernet Auxiliary (Aux) interface
l 1.8 Gbps UL or 1.8 Gbps DL throughput