System Hardware 33
Product description Part number
60GHz cnWave V1000 Client Node with UK Cord C600500C004A
60GHz cnWave V1000 Client Node with ANZ Cord C600500C008A
60GHz cnWave V1000 Client Node with Brazil Cord C600500C009A
60GHz cnWave V1000 Client Node with Argentina Cord C600500C010A
60GHz cnWave V1000 Client Node with China Cord C600500C011A
60GHz cnWave V1000 Client Node with South Africa Cord C600500C012A
60GHz cnWave V1000 Client Node with India Cord C600500C013A
60GHz cnWave V1000 Client Node with no Cord C600500C014A
60GHz cnWave V1000 Client Node with Israel cord - for Israel Only C600500C016A
60GHz cnWave V1000 Client Node with no Cord and no Power supply C600500C017A
V2000 Client Node (CN)
V2000 is an outdoor CN that can be connected to a DN. This CN can also act as a DN for PTP
deployments. It supports a 2.5 Gigabit Ethernet Main interface and 2.5 Gigabit Ethernet Auxiliary (Aux)
interface. The V2000 CN can support a single wireless link and therefore, it can be used as a CN in all
topologies or POP in a PTP topology.
A V2000 CN can be powered using 30W passive POE or using 802.3at complaint POE switch. For more
information about the supported power supply and cable lengths, refer to the Power supply units (PSU)
section. A V2000 CN can also power 802.3af/at compliant auxiliary device through the Aux Ethernet
interface.
Figure 13:
V2000 CN's front and rear views
To Next Page
Loading...
