Canon imagePRESS Server A2200 - Networking and Connectivity; User Software; Safety and Emissions Compliance

SPECIFICATIONS 136
Networking and connectivity
• Supports AppleTalk and TCP/IP protocols simultaneously.
• Supports EtherTalk Phase 2 (allows users to print from a Mac OS computer to the
imagePRESS Server using the AppleTalk network protocol over an Ethernet network).
• RJ-45 connector (upper port) that supports 10BaseT/100BaseTX/1000BaseT twisted pair
network connectivity.
• RJ-45 connector (lower port) that provides the Command/Status interface between the
imagePRESS Server and the copier.
NOTE: The network cable at the customer site and the Command/Status Ethernet Crossover
cable included with the imagePRESS Server are not interchangeable. Make sure to attach the
correct cable to the appropriate RJ-45 port on the imagePRESS Server back panel (see
page 28).
User software
A complete description of user software is provided in Welcome on the User Documentation
CD. For optimal performance, maintain current versions of the user software on every
network computer used to print to the imagePRESS Server. User software may be installed
directly on client computers equipped with a DVD drive, or over a network via the Fiery User
Software Installer that resides on the imagePRESS Server.
Safety and emissions compliance
The imagePRESS Server has been certified to meet or surpass the following government
standards:
Safety approvals EMI/EMC approvals
UL 60950-1:2007 (TUV/CU mark) FCC Class B
CAN/CSA-c22.2 #60950-1-07 VCCI Class B
EN 60950-1:2006+A11 (TUV/GS mark) EN55022:2006+A1:2007-Class B
CB scheme IEC 60950-1:2001 (1st edition) EN55024:1998+A1:2001&A2:2003
CB scheme IEC 60950-1:2005 (2nd edition) AS/NZS CISPR22:2006-Class B