SERVICE PROCEDURES 44
SERVICE PROCEDURES
Generally, the imagePRESS Server requires no regular service or maintenance. Use the
procedures in this chapter to inspect, remove, reseat, and replace major hardware components,
as well as install system software.
Overview
This chapter includes information about servicing the following components:
•Boards and cables
• Motherboard components (DIMMs, CPU, CMOS, jumpers, and battery)
•Fans
•Power supply
• HDDs (hard disk drives)
•DVD drive
Replacement parts are available from your authorized service representative. The terms
“replace” and “replacing” are used throughout this guide to mean the reinstallation of existing
components. Install new components only when necessary. If you determine that a
component that you have removed is not faulty, reinstall it.
NOTE: Replacement parts and specifications are subject to change. When ordering
replacement parts, refer to the current parts list maintained by your authorized
service/support center. Install the correct parts as directed by your service/support center.
When performing the service procedures described in this chapter, follow the precautions
listed on page 14.
The tools required to service the imagePRESS Server are listed on page 18.
To Next Page
Loading...
