SERVICE PROCEDURES 76
7. If a monitor is connected to the imagePRESS Server:
• When the Log On to Windows dialog box appears on the monitor, type Administrator in
the user name field, type
Fiery.1 in the password field, and then press Enter on
the keyboard.
NOTE: Ty pe Fiery.1 exactly as shown. The password is case-sensitive; for example,
fiery.1 will not work.
• Wait for Idle to display on FieryBar on the monitor.
If the imagePRESS Server is not connected to the copier, or if the copier is not powered
on, a message displays indicating the status. Expect this message. The imagePRESS Server
detects the copier after you connect the imagePRESS Server to the copier.
8. Reattach any dongle(s) (for example, for Compose or Impose) or USB storage device you may
have removed previously.
Error messages
One of the following error messages may display on the imagePRESS Server Control Panel or
monitor when you attempt to transfer options to the new motherboard.
Could not mount the dos/boot partition—You have attempted to transfer options using the
Feature Update CD. The Feature Update CD is not supported by the imagePRESS Server.
Obtain the Fiery Options Utility and try the procedure again.
Invalid dongle found! Please remove dongle and connect the correct dongle—The
attached dongle is not supported by the Fiery Options Utility. The dongle may have been
attached by mistake. Obtain a valid dongle and try again.
More than one dongle found. Remove all dongles except the correct dongle—The
Fiery Options Utility will not work when more than one dongle is attached to the system.
No uses remaining—The dongle has already been used and cannot be reused. Obtain an
unused dongle and start again.
Check power and Video cable connections—There is a problem with the connection
between the imagePRESS Server and the copier. Make sure that the interface cables are
properly connected and the copier is on and ready to print.
If an error condition cannot be corrected, restore the previous hardware configuration, if
possible, and contact your authorized service/support center.
To Next Page
Loading...
