2
Load the paper.
(See "Loading Rolls on the Roll Holder.") →P.531
(See "Loading Rolls in the Printer.") →P.534
Note
• If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
(See "Automatic Banding Adjustment.") →P.738
3
Select the White/Black Backing Plate color.
Note
• For the color of the White/Black Backing Plate, select the color from when color calibration was executed using the
spectrophotometer unit.
(See "Executing Color Calibration.") →P.818
Executing Color Check
1
Open the Color Measurement sheet.
2
Select the printer you want to execute color check on
from the Printer list.
Executing Color Check (Mac OS X)
iPF6400
User's Guide
Color Management Color Calibration Management Console (Mac OS X)
828
To Next Page
Loading...
