Canon imagePROGRAF iPF6400 User Manual

3
Close all ink tank lock levers, and then close the Ink Tank
Cover.
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge unless a replacement message appears.
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink to leak out.
4
When the process is finished, "Completed! Turn Power
Off!!" is displayed.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
1 Disconnect the power cord and interface cable.
Important
• Unplug the power cord once the power is turned off. Unplugging the printer before it is off and moving it may cause
damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall the ink tank, and perform
the procedure again.
2
Open the Top Cover.
Preparing to Transfer the Printer iPF6400
User's Guide
Maintenance and Consumables Other Maintenance
872

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0