Handling rolls
4. Using both hands, pull out the roll evenly on both ends and insert it in the Paper Feed Slot
(a). Advance the roll until the buzzer sounds.
Important
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may af fect
the printing quality . W e recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load the roll so that there is no gap between the right edge of the paper and the Roll Holder .
5. Lower the Ejection Guide .
6. Close the T op Cover .
120 Handling Paper
To Next Page
Loading...
