Ink T anks
Load the ink tank (330 ml)
1. Before opening the pouch, tilt the Ink T ank to the left and right gently seven or eight times.
Note
• If you do not agitate the Ink T ank , the ink may sediment, which may af fect printing quality .
2. Open the pouch and remove the Ink T ank .
Note
• Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink T ank ,
and af fect printing quality .
• A void dropping the Ink T ank after removing it from the pouch. Otherwise, ink may leak and cause
stains.
• Do not remove and agitate ink tanks that have already been installed in the printer . Ink may leak out.
3. Press the OK button and insert the Ink T ank into the holder with the ink holes facing down,
as shown.
Important
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink T ank does not t in the holder , do not force it into the holder . Make sure the color of the
Ink T ank Lock Lever matches the color of the Ink T ank , and check the orientation of the Ink T ank
before reloading it.
Maintenance 569
To Next Page
Loading...
Need help?
General