Messages regarding ink
Messages regarding ink
Ink insufcient.
Cause Corrective Action
The ink level is low , so you cannot print, clean the
Printhead , or do other operations that require ink.
Replace the Ink T ank that is low with a new Ink T ank .
( → P .563)
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink T ank Cover and replace the Ink T ank
for which the Ink Lamp is ashing.
( → P .563)
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action. ( → P .645)
Close Ink T ank Cover
Cause Corrective Action
The Ink T ank Cover is open. Close the Ink T ank Cover .
662 Error Message
To Next Page
Loading...
Need help?
General